Site Design Standards (SDS)
SDS 6.1 Lot Width, Depth, & Orientation
| Single Family | Multi-Family | |||||||||||
| RP-1N | RP-1A | R-1A | RP-1 | R-1 | RP-2 | R-2 | RP-3 | R-3 | RP-4 | RP-5 | RP-6 | |
SDS 6.1.1 Required Lot Width & Depth.
Lot width and depth are regulated by the UDO. For reference, UDO section numbers are given in the following table.
| Required Lot Width and Depth | ||
| Applies for all Development (Includes Redevelopment & Infill Development) | Applies Only to Redevelopment & Infill Development | |
| Zoning District | By UDO Section: | |
| R-1, RP-1 | 18.180.030 |
The average lot width of new parcels created by subdivision or lot split shall be no less than 80% of the average width of existing lots on the same and facing block faces, but shall not be required to be greater than 120 feet and may not be less than the minimum required by the UDO. |
| R-1A, RP-1A | 18.190.030 | |
| RP-1N | 18.195.030 | |
| R-2, RP-2 | 18.200.030 | |
| PRN | 18.245.030 | |
| R-3, RP-3 | No applicable standard | |
| RP-4 | ||
| RP-5 | ||
| RP-6 | ||
SDS 6.1.2 Lot Orientation.
The orientation of new lots created by subdivision or lot split shall repeat the predominate relationship of buildings-to-buildings and buildings-to-street along the same and facing block faces.
Effective on: 1/1/1901