Site Design Standards (SDS)
SDS 4.6 Setbacks
| Single Family | Multi-Family | Commercial | ||||||||||||||||||
| RP-1N | RP-1A | R-1A | RP-1 | R-1 | RP-2 | R-2 | RP-3 | R-3 | RP-4 | RP-5 | RP-6 | CP-0 | C-0 | CP-1 | C-1 | CP-2 | C-2 | CP-3 | C-3 | |
SDS 4.6.1. Intent.
Building setbacks shall create a uniformed setback along a public street. For infill, redevelopment, rehabilitation projects or new buildings in a developing site the setbacks shall match the established adjacent building setbacks.
SDS 4.6.2 Standard.
Front yard and public setbacks are regulated by the UDO and this document according to the following table.
| Setbacks | |||
|---|---|---|---|
| Zoning District | UDO Reference | Applies to All Development (Includes Redevelopment & Infill Development) | Applies Only to Redevelopment & Infill Development |
| Note 1: Shall not apply if the single-family residential development has already been preliminarily platted. A 30 feet setback would be required for the approved plats. Note 2: All new buildings along the perimeter of a partially-developed office complex shall meet the established building setbacks. Note 3: Shall not apply for office buildings in an established office development prior to the adoption of these standards. |
|||
| R-1, RP-1 | 18.180.030 |
|
|
| R-1A, RP-1A | 18.190.030 |
|
|
| RP-1N | 18.195.030 | ||
| R-2, RP-2 | 18.200.030 |
|
|
| R-3, RP-3 | 18.210.030 |
|
|
| RP-4 | 18.220.030 | ||
| RP-5 | 18.230.030 | ||
| RP-6 | 18.240.030 | ||
| PRN | 18.245.030 |
|
|
| C-O, CP-O | 18.250.030 |
|
|
| C-1, CP-1 | 18.260.030 |
|
|
| C-2, CP-2 | 18.270.030 | ||
| C-3, CP-3 | 18.280.030 | ||
Effective on: 1/1/1901